airport2-portinspector
configuration and management utilities for Apple AirPort base stations
Install
- All systems
-
curl cmd.cat/airport2-portinspector.sh
- Debian
-
apt-get install airport-utils
- Ubuntu
-
apt-get install airport-utils
- Kali Linux
-
apt-get install airport-utils
- Windows (WSL2)
-
sudo apt-get update
sudo apt-get install airport-utils
- Raspbian
-
apt-get install airport-utils
- Dockerfile
- dockerfile.run/airport2-portinspector
airport-utils
configuration and management utilities for Apple AirPort base stations
This package contains various utilities to manage the Apple AirPort base stations. Be aware that Apple released several versions of the AirPort base station; the original AirPort ("Graphite") was a rebranded Lucent RG-1000 base station, doing 802.11a/b. The AirPort Extreme ("Snow") is an Apple-built 802.11a/b/g base station. For the original Apple AirPort and the Lucent RG-1000 base stations only: - airport-config: base station configurator - airport-linkmon: wireless link monitor, gives information on the wireless link quality between the base station and the associated hosts For the Apple AirPort Extreme base stations only: - airport2-config: base station configurator - airport2-portinspector: port maps monitor - airport2-ipinspector: WAN interface monitoring utility For all: - airport-modem: modem control utility, displays modem state, starts/stops modem connections, displays the approximate connection time (Extreme only) - airport-hostmon: wireless hosts monitor, lists wireless hosts connected to the base station (see airport2-portinspector for the Snow)